Pneumatic piston pump LT-S
Dimensional Drawing Directions for use ● Since the viscosity of oil changes depending on the oil temperature in summer and winter, be careful to use it within the operating viscosity range. Please see the viscosity table. ● Do not use special additive oil, water-soluble oil or solvent. ● Regularly inspect the oil in use for […]
Detail infor
Dimensional Drawing
Directions for use
● Since the viscosity of oil changes depending on the oil temperature in summer and winter, be careful to use it within the operating viscosity range. Please see the viscosity table.
● Do not use special additive oil, water-soluble oil or solvent.
● Regularly inspect the oil in use for contamination, etc. If any are found, immediately flush the tank and replace it with new oil.
● Do not overtighten the outlet fitting. Please refer to the tightening torque chart.
● Please put clean oil.
● The total discharge volume of the metering valve used is within 5 ml.
● Please contact our Global Center for system design.
Specifications
| Pump | Discharge Volume | 8ml/shot |
| Discharge Pressure | 3.4MPa (safety valve set pressure) | |
| Working Viscosity Range | 65〜1300mm²/s | |
| Reservoir Capacity | 260mℓ(plastic) | |
| Weight | 1.2kg | |
| Other | With pressure relief mechanism | |
| Model | Part Number |
|---|---|
| LT-S | 103421 |