Compact Positive Displacement Injector Valve (MOS) MOS
Model Model Part Number Discharge volume (ml) Mark MOS-1 205300 0.01 1 MOS-3 205301 0.03 3 MOS-5 205302 0.05 5 MOS-10 205303 0.1 10 Specifications Discharge Volume 0.01、0.03、0.05、0.1ml/stroke Operating pressure 0.9MPa Reset pressure 0.3MPa [ Adapter (SAS) ] [ Plug (BPS) ] How To Order（Also available upon order in assembly.） Model Model Part Number SAS […]
Detail infor
Model
| Model | Part Number | Discharge volume (ml) | Mark |
|---|---|---|---|
| MOS-1 | 205300 | 0.01 | 1 |
| MOS-3 | 205301 | 0.03 | 3 |
| MOS-5 | 205302 | 0.05 | 5 |
| MOS-10 | 205303 | 0.1 | 10 |
Specifications
| Discharge Volume | 0.01、0.03、0.05、0.1ml/stroke |
|---|---|
| Operating pressure | 0.9MPa |
| Reset pressure | 0.3MPa |
[ Adapter (SAS) ]
[ Plug (BPS) ]
How To Order（Also available upon order in assembly.）
Model
| Model | Part Number |
|---|---|
| SAS | 619293 |
| BPS | 619219 |
Directions for use
| ● | When installing the valve on a junction side, screw it into place with a wrench applied to the valve body (Tightening torque : 50kgf·cm )） |
| ● | When connecting the valve to piping, turn bushing holding nipple with a wrench. |
| ● | For system planning information, Contact us. |
Document
Piping Layout
Necessarily match the layout in Figure 1 is an example. .
Use an appropriate sealant where mark shown.
Mark denote tightening torque.See the tightening torque list.
Operational squence
Dimensional Drawing
