Compact Automatic Intermittent Piston Pump MLZ
Model indication method Model Part Number MLZ-CE-A-1 367201 MLZ-CE-A-1L 367216 MLZ-CE-A-2 367206 MLZ-CE-A-2L 367221 MLZ-CE-B-1 367202 MLZ-CE-B-1L 367217 MLZ-CE-B-2 367207 MLZ-CE-B-2L 367222 MLZ-CE-C-1 367203 MLZ-CE-C-1L 367218 MLZ-CE-C-2 367208 MLZ-CE-C-2L 367223 MLZ-CE-D-1 367204 MLZ-CE-D-1L 367219 MLZ-CE-D-2 367209 MLZ-CE-D-2L 367224 MLZ-CE-E-1 367205 MLZ-CE-E-1L 367220 MLZ-CE-E-2 367210 MLZ-CE-E-2L 367225 Specifications Pump Discharge Volume 1.5〜2.5mℓ/stroke Discharge Pressure 0.3MPa […]
Detail infor
Model indication method
| Model | Part Number |
|---|---|
| MLZ-CE-A-1 | 367201 |
| MLZ-CE-A-1L | 367216 |
| MLZ-CE-A-2 | 367206 |
| MLZ-CE-A-2L | 367221 |
| MLZ-CE-B-1 | 367202 |
| MLZ-CE-B-1L | 367217 |
| MLZ-CE-B-2 | 367207 |
| MLZ-CE-B-2L | 367222 |
| MLZ-CE-C-1 | 367203 |
| MLZ-CE-C-1L | 367218 |
| MLZ-CE-C-2 | 367208 |
| MLZ-CE-C-2L | 367223 |
| MLZ-CE-D-1 | 367204 |
| MLZ-CE-D-1L | 367219 |
| MLZ-CE-D-2 | 367209 |
| MLZ-CE-D-2L | 367224 |
| MLZ-CE-E-1 | 367205 |
| MLZ-CE-E-1L | 367220 |
| MLZ-CE-E-2 | 367210 |
| MLZ-CE-E-2L | 367225 |
Specifications
| Pump | Discharge Volume | 1.5〜2.5mℓ/stroke |
| Discharge Pressure | 0.3MPa | |
| Motor | Voltage / Current | AC100Vφ1/50mA |
| AC200Vφ1/25mA（50Hz） | ||
| AC100Vφ1/42mA | ||
| AC200Vφ1/18mA（60Hz） | ||
| Output | 3W Synchronous Motor | |
| Emergency Detection | Oil Level Switch | Contact Type A Contact (NO) ON at low level |
| Contact capacity 0.5A、AC DC200V/30W smaller |
||
| Operation Rating | Continuous | |
| Working Viscosity Range | 32〜1300mm²/s | |
| Reservoir Capacity | 0.8ℓ | |
| Weight | 1.2kg | |
| Protection class | IP54（CE Approved type） | |
Directions for use
● Replace or clean the suction filter once a year.
Please see the adaptation table.
● Since oil changes its viscosity depending on the oil temperature in summer and winter, be careful to use it within the Working Viscosity Range. Please see the viscosity table.
● Do not use special additive oil, water-soluble oil or solvent.
● Regularly inspect the oil in use for contamination, etc. If any are found, immediately flush the tank and replace it with new oil.
● Please be careful about mistakes such as voltage.
● Do not overtighten the outlet fitting. Please refer to the tightening torque chart.
● Do not forcibly depress the oil level adjustment knob.
● Do not adjust the oil level when the oil level adjustment knob is raised. Please adjust at the lowest limit.
Replacement MotorPart Model
| Interval | 6min. | 15min. | 30min. | 60min. | 120min. | ||
|---|---|---|---|---|---|---|---|
| Motor speed rpm (50 Hz) | 10 | 4 | 2 | 1 | 1/2 | ||
| Replacement Motor Model | 100V | Part Number | M-B1 | M-C1 | M-D1 | M-E1 | M-F1 |
| Part Number | 521194 | 521193 | 520062 | 520061 | 520060 | ||
| 200V | Part Number | M-B2 | M-C2 | M-D2 | M-E2 | M-F2 | |
| Part Number | 521196 | 521195 | 520067 | 520066 | 520065 | ||
Hydraulic circuit drawing
Dimensional Drawing
Improper handling can result in a death or serious injury.
Electrical shock may be received under certain conditions.
Be sure to ground.
How to adjust the Discharge Volume
※ If you adjust the oil amount, the balance of the oil amount at each lubrication point will change, so be sure to check with the machine manufacturer.
Wiring digram
