sensor EPM
Terminal genuine grease discharge detection and temperature detection Specifications Contact configuration B contact Rated Voltage DC3～DC24V Rated current 5mA Used Grease LHL- X100 Operating envIronment temperature 0℃～40℃ standard IP67 (Get planned), RoHS2 Mounting Directions No limit Used grease piping length NT-4, NT-4H, ST-4Z, CT-4 Length 2000 mm or less Connected metering valve MU valve (Discharge […]
Detail infor
Terminal genuine grease discharge detection and temperature detection
Specifications
| Contact configuration | B contact |
| Rated Voltage | DC3～DC24V |
| Rated current | 5mA |
| Used Grease | LHL- X100 |
| Operating envIronment temperature | 0℃～40℃ |
| standard | IP67 (Get planned), RoHS2 |
| Mounting Directions | No limit |
| Used grease piping length | NT-4, NT-4H, ST-4Z, CT-4 Length 2000 mm or less |
| Connected metering valve | MU valve (Discharge Amount 0.05 to 0.5 ml) |
| Connection screw diameter | M6 × 0.75 taper, M6 × 1 taper, M8 × 1.25 taper, R1 / 8 (Use as a swivel joint is not possible) |
| Piping connection port | One-touch type, bushing (using CB-4) |
| wiring | Exterior PVCφ 5.2 Length 2500 mm, 4 wires (for contacts, for thermocouples) Minimum bending radius 30 mm (M8 connector included) |
| Built-in temperature sensor | K-type thermocouple |
| Temperature measurement range | 0℃～90℃ |
Dimensional Drawing
Model indication method
| Model | Part Number | lubricant | Screw Size | Piping Connection | wiring length | wiring position |
|---|---|---|---|---|---|---|
| EPM-L-01-W-2.5-O | 420100 | LHL X-100 | R1/8 | φ4One touch | 2.5ｍ | Upper |
| EPM-L-02-W-2.5-O | 420101 | M6×0.75taperー | φ4One touch | 2.5ｍ | Upper | |
| EPM-L-03-W-2.5-O | 420102 | M6×1.0taperー | φ4One touch | 2.5ｍ | Upper | |
| EPM-L-04-W-2.5-O | 420103 | M8×1.25taperー | φ4One touch | 2.5ｍ | Upper | |
| EPM-L-01-B-2.5-O | 420104 | R1/8 | φ4 Bushing | 2.5ｍ | Upper | |
| EPM-L-02-B-2.5-O | 420105 | M6×0.75taperー | φ4 Bushing | 2.5ｍ | Upper | |
| EPM-L-03-B-2.5-O | 420106 | M6×1.0taperー | φ4 Bushing | 2.5ｍ | Upper | |
| EPM-L-04-B-2.5-O | 420107 | M8×1.25taperー | φ4 Bushing | 2.5ｍ | Upper |
Dimensional Drawing
EPM System Layout
Relay board unit
| Model | Part Number |
|---|---|
| EPM-RU-3-1 | 420150 |
End substrate unit
| Model | Part Number |
|---|---|
| EPM-EU-6 | 420151 |