Grease pump GMS

Specifications Discharge volume 20ml/min Discharge pressure 8.0MPa (safety valve set pressure) Grease level switch （Option） Contact type B contact(NC) It turns OFF at a oil level minimum. Contact Capacity AC250V 2A　DC30V 3A　smaller Power DC24V Moter 15W/0.65A Pressure relief solenoid 30W/1.25A Total 45W/1.9A Pressurization ON time: 　Within 7.5min. Pressure relief OFF time: 　1hour or more […]

Contact advice

Detail infor

Specifications

	Discharge volume	20ml/min
	Discharge pressure	8.0MPa (safety valve set pressure)
Grease level switch （Option）	Contact type	B contact(NC) It turns OFF at a oil level minimum.
Grease level switch （Option）	Contact Capacity	AC250V 2A　DC30V 3A　smaller
Power	DC24V
	Moter	15W/0.65A
	Pressure relief solenoid	30W/1.25A
	Total	45W/1.9A
Pressurization	ON time: 　Within 7.5min.
Pressure relief	OFF time: 　1hour or more
Working consistency	NLGI No.000、00、0、1 (Lithium grease)
Guaranteed grease	Lube Original Grease MP0、FS2
Weight	1.8kg(3P)、2.8kg(8P)
Pressure relief	Built-in solenoid

How To Order

Model

Model	Part Number
GMS-4-3P	103624
GMS-4-8P	103625
GMS-4L-3P	103619
GMS-4L-8P	103654

Environmental conditions

●	Use Guaranteed greases.
●	Never use molybdenum disulfide-contained grease.
●	When using grease which is not Lube original grease, please be sure to consult.
●	Do not use any greases containing substances that attack brass and rubber.
●	When refilling, take care not let foreign matter in the grease.
●	Avoid continuous operation.
●	After refilling, always press AIR BLEED push button to purge the pump of air.
●	When refilling grease in main pipe and during test operation, stick to an intermittent cycle of running for 30 seconds and resting for 90 seconds. Failure to follow this requirement will result in thermal protector being activated by a heated solenoid, leaving the solenoid de-energized without pressure built up.

Document

Hydraulic circuit drawing

Wiring digram

Dimensional drawing