Air-driven, quick-drying corresponding trace discharge piston pump VBP
Model indication method Model Part Number Number of circuits Generator reservoirs 1.8ℓ 3.0ℓ VBP-1 112740 1 ○ VBP-2 112741 2 ○ VBP-3 112742 3 ○ VBP-1-G 112746 1 ○ ○ VBP-2-G 112747 2 ○ ○ VBP-3-G 112748 3 ○ ○ VBP-1-3 112752 1 ○ […]
Detail infor
Model indication method
| Model | Part Number | Number of circuits | Generator | reservoirs | |
|---|---|---|---|---|---|
| 1.8ℓ | 3.0ℓ | ||||
| VBP-1 | 112740 | 1 | ○ | ||
| VBP-2 | 112741 | 2 | ○ | ||
| VBP-3 | 112742 | 3 | ○ | ||
| VBP-1-G | 112746 | 1 | ○ | ○ | |
| VBP-2-G | 112747 | 2 | ○ | ○ | |
| VBP-3-G | 112748 | 3 | ○ | ○ | |
| VBP-1-3 | 112752 | 1 | ○ | ||
| VBP-2-3 | 112753 | 2 | ○ | ||
| VBP-3-3 | 112754 | 3 | ○ | ||
| VBP-4-3 | 112755 | 4 | ○ | ||
| VBP-5-3 | 112756 | 5 | ○ | ||
| VBP-1-G-3 | 112762 | 1 | ○ | ○ | |
| VBP-2-G-3 | 112763 | 2 | ○ | ○ | |
| VBP-3-G-3 | 112764 | 3 | ○ | ○ | |
| VBP-4-G-3 | 112765 | 4 | ○ | ○ | |
| VBP-5-G-3 | 112766 | 5 | ○ | ○ | |
Specification
| Discharge volume | 0〜0.07mℓ/ shot |
| Discharge cycle | 2 times per second (maximum) |
| Pump ratio | 1:05 |
| (Air pressure: 0.3 MPa, Discharge pressure: 1.5 MPa, Discharge volume: 0.05 ml / shot) | |
| Working air pressure power range | 0.3〜0.7MPa |
| 0.4 to 0.7MPa (Pulse oscillator Specification) | |
| Use viscosity range | 2〜180mm²/s |
| Standard number of pump circuits | 1.8 ℓ Reservoirs: 3 circuits |
| 3.0 ℓ Reservoirs: 5 circuits | |
| reservoirs capacity | 1.8ℓ、3ℓResinReservoirs (standard) |
A special unit with a combination of pump circuit and Reservoirs capacity is also available.
Directions for use
● If you use a special fluid, please contact our Global Center.
● Please see the instruction manual.
Dimensions
Dimensions
Adjustment method of each adjustment part of VBP type Pump
Oil volume adjustment knob speed-Discharge volume
| Number of turns of knob | 0 | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 |
|---|---|---|---|---|---|---|---|---|---|
| Discharge volume per shot | 0 | 0.005 | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.06 | 0.07 |
Caution: The scale setting below 1 rotation makes the Discharge volume unstable. Please use with setting of 1 rotation or more if possible.
Unit: cc / shot
Pulse oscillator adjustment method
Adjust using a flathead screwdriver according to Table 2. The value of “scale and number of discharges” is a reference value, and the variation of each pulse oscillator is about ± 30%. Make fine adjustments to the table values as a guide only.
Scale-number of discharges
Unit: times / minute
| position | scale | Pressurized air pressure (MPa) | ||
|---|---|---|---|---|
| 0.3 | 0.4 | 0.5 | ||
| ① | ＊ | 150 | 130 | 120 |
| ② | Ⅲ | 3 | 3 | 3 |
△ Attention
1. The discharge speed of the pulse oscillator changes with pressurized air pressure as described above. Be sure to set the pressure of pressurized air with the pressure reducing valve.
2. Do not use in the division between position 2 and 1 on the pulse oscillator scale.
How to remove air
At the initial operation of Pump, air removal work is required. Air removal is performed by operating the Pump with the Discharge volume set to maximum (14 knobs) or operating the manual button.
